$0.00
Checkout
- Product overview
- Reviews (0)
Bluedery CPE220 wireless bridge is a 5.8G Long Range WiFi Extender Outdoor CPE with a digital display. It complies with the 802.11a and 802.11n,standards to ensure interoperability. Point-to-point pairing also can be done by dialing without having to access the GUI, avoid the complex setup program, save much human work and cost, make the long-range wireless coverage, data transmit, and wireless monitoring simple and professional.
PTMP Pre-programmed: simply connect the both bridges to PoE adapters through the ethernet cables, system will power on, and wait for 1 minute for the both equipment to pairing and connect together, the "Link" green LED indicator will turn on to indicate that the both bridges have been paired succeeded. Great for extend the internet to your garage, barn, store, and warehouse through 5.8Ghz wireless transmission, instead of complicated wire connection.
Using 5.8G / 300Mbps wireless transmission rate between wireless bridges can support 1.2 miles transmission distance(Barrier-free), and can provide up to 100Mbps wired network speed, suitable for connecting the networks in 2 or more buildings, internet access sharing, remote video camera surveillance, or remote network WiFi access.
Point to Point Mode: Connect the both wireless bridges to the PoE power adapter will auto pair, no need connect to computer for the complicated configures, at point-to-point mdoe can use for long range video surveillance and internet network sharing, the master bridge output WiFi hot point, you can enter password to get access, extend the WiFi access coverage up to 1.2 miles in 60 a degree angle of the front direction.
Point to Multiple Point Mode: suit for the video surveillance DVR system to receives the IP cameras video stream for different building or place, the master bridge connects to the DVR system, and the slave bridges connects to the IP cameras, in this way you can management different building's IP cameras in one system without wiring, you have to connect to computer to configure the master and slave bridge which need some internet knowledge.
The FCC ID: 2A4ZJCPE220 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two condistions:(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
PTMP Pre-programmed: simply connect the both bridges to PoE adapters through the ethernet cables, system will power on, and wait for 1 minute for the both equipment to pairing and connect together, the "Link" green LED indicator will turn on to indicate that the both bridges have been paired succeeded. Great for extend the internet to your garage, barn, store, and warehouse through 5.8Ghz wireless transmission, instead of complicated wire connection.
Using 5.8G / 300Mbps wireless transmission rate between wireless bridges can support 1.2 miles transmission distance(Barrier-free), and can provide up to 100Mbps wired network speed, suitable for connecting the networks in 2 or more buildings, internet access sharing, remote video camera surveillance, or remote network WiFi access.
Point to Point Mode: Connect the both wireless bridges to the PoE power adapter will auto pair, no need connect to computer for the complicated configures, at point-to-point mdoe can use for long range video surveillance and internet network sharing, the master bridge output WiFi hot point, you can enter password to get access, extend the WiFi access coverage up to 1.2 miles in 60 a degree angle of the front direction.
Point to Multiple Point Mode: suit for the video surveillance DVR system to receives the IP cameras video stream for different building or place, the master bridge connects to the DVR system, and the slave bridges connects to the IP cameras, in this way you can management different building's IP cameras in one system without wiring, you have to connect to computer to configure the master and slave bridge which need some internet knowledge.
The FCC ID: 2A4ZJCPE220 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two condistions:(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Reviews (0)
There are no reviews for this product.
