$0.00
Checkout
- Product overview
- Reviews (0)
Need to clean the calcium deposits on the internal turbo cell plates? You are checking the right product. AR-PRO offers the perfect cleaning stand replacement (GLX-CELLSTAND) compatible with all Hayward salt chlorinator turbo cells for less cost from the OEM yet is made of premium, heavy duty plastic, improving the parts lifespan by at least 50%.
Generally speaking, you need to inspect your turbo cell about every 3 months of operation or every 500 hours, depending on several factors such as calcium lever and PH of your pool water.
How to Clean Your Chlorinator Turbo Cell: 1) Turn off the power and didactive the pump. 2) Remove the turbo cell and if you don’t see any visible flaky deposits, reinstall the cell. 3) Flush the scales off with high pressure hose if deposits are seen. 4) Mix a 4:1 solution of water to muriatic acid in a clean plastic container. (ALWAYS ADD ACID TO WATER NOT WATER TO ACID)
How to Clean Your Chlorinator Turbo Cell: 5) Fasten the turbo cell to our cleaning stand with cord side down then filling it with the acid solution and let it soak for 15 minutes. Repeat the process until clean. 6) Reinstall the turbo cell then press the diagnostic button next to the display for 3 seconds to stop the flashing inspect cell LED and rest the timer for the next 500 operational hours.
IMPORTANT NOTE: This replacement kit is an aftermarket product produced by CalPalmy (TM). It meets or exceeds the performance of OEM replacements (based on in-house testing). We do not have any affiliation with or endorsement from any of the manufacturers mentioned.
Generally speaking, you need to inspect your turbo cell about every 3 months of operation or every 500 hours, depending on several factors such as calcium lever and PH of your pool water.
How to Clean Your Chlorinator Turbo Cell: 1) Turn off the power and didactive the pump. 2) Remove the turbo cell and if you don’t see any visible flaky deposits, reinstall the cell. 3) Flush the scales off with high pressure hose if deposits are seen. 4) Mix a 4:1 solution of water to muriatic acid in a clean plastic container. (ALWAYS ADD ACID TO WATER NOT WATER TO ACID)
How to Clean Your Chlorinator Turbo Cell: 5) Fasten the turbo cell to our cleaning stand with cord side down then filling it with the acid solution and let it soak for 15 minutes. Repeat the process until clean. 6) Reinstall the turbo cell then press the diagnostic button next to the display for 3 seconds to stop the flashing inspect cell LED and rest the timer for the next 500 operational hours.
IMPORTANT NOTE: This replacement kit is an aftermarket product produced by CalPalmy (TM). It meets or exceeds the performance of OEM replacements (based on in-house testing). We do not have any affiliation with or endorsement from any of the manufacturers mentioned.
Reviews (0)
There are no reviews for this product.
